JMF DEV – Office Suites

Pershing Square Building 11th Floor

Downtown – Los Angeles-CA

Another project from JMF DEVELOPMENT LLC. IT’S SO CLEAN to Grind, Prepare and apply an Epoxy Coating on the flooring of the office suites on the 11th floor of the building.


Job Performed in 4 Days

 

A time sensitive schedule allowing us to work only during the night time and to deliver the job in 4 days. With the right tools, expertise, and skills this job was perfectly done on time.

The big challenge on this 3.000 square feet job was to search and patch all the structural cracks that could lead the Epoxy thru the floor below. After all the major cracks and holes been patched the Grinding process was done and the Epoxy Coating was applied on the floor.

IT'S SO CLEAN - Concrete Polishing

Bossa Nova Restaurant

Bossa Nova Restaurant

Los Angeles-CA

A new project for Bossa Nova Restaurant. IT’S SO CLEAN to Grind, Prepare, Stain with logo application and Polish the Concrete Floor.


Job Performed in 20 Days

Time was the big challenge of this 1.500 square feet project. The opened to the public restaurant gave us a very short window to work from 4 am to 10 am.

Originally they were facing big problems with a slippery flooring due to an old Acrylic Coating, food grease, and detergent residue build-up, which created several layers and became a “soap bar” on the floor. On the top of these problems, the flooring had several steep ramps that were not properly angle leveled.  There were also problems with the drain system that some needs to be added and others had to be moved out to different areas in order to flow the water properly.

All the Preparation with demolition, patch repairs, self-leveling overlay on restrooms area, ramps and drain’s trench was done prior to finish the Grinding process and took over 15 days be completed. After all preparation done we started the Polishing process with a color dye and logo installation, including a Densifier and Penetrating Sealant application.

The high glossy natural wet look finishing with a yellow and reddish ascent gave a new cozy look to the restaurant ambient. IT’S SO CLEAN also trained the staff to properly maintain the floor, using an auto-scrubber and high-speed floor machine to keep up the floor always clean, free of food grease and polished all the times. The job was successfully done within 20 days of its commencement.

IT'S SO CLEAN - EPOXY COATING

JMF DEV – Downtown LA

Restaurant at Pershing Square Building

Downtown Los Angeles-CA

Project from JMF DEVELOPMENT LLC. IT’S SO CLEAN to Grind, Prepare and Install an Epoxy Coating on the floor of the restaurant facility under construction in Downtown Los Angeles.


Job Performed in 7 Days

The multi-level restaurant facility mixed with Terrazzo and Concrete floor, raised on the top of a nightclub basement, was a perfect match to perform an Epoxy Coating as requested. With a total area of 7.ooo square feet, the flooring preparation was very difficult due to various damages areas that needed to be demolished and installed a new overlay. Besides of that, we were faced a detailed search and patch job on cracks and holes that could be driven down to the floor below.  The result was simply amazing, the Epoxy coating gave a glossy shine wet look to the ambient and cost wise this is the most economic process to restore a floor and give a long good looking.

EvoCon – Office Bldg.

Stand Alone Office Building

Burbank-CA

Project from EvoCon Construction Inc. IT’S SO CLEAN to Grind, Prepare and Semi-Polishing the concrete floor of an Office Building in Burbank-CA.


Job Performed in 14 Days

This stand-alone office building located in Burbank, CA was a kind of challenge due to serious concrete floor imperfections and heavy mastic glue left on the surface. We decided to operate this job using the Terrco grinder machine (2 units) to Grind and Prepare the 5.500 square feet area. The customer requested a Semi-Polishing finish, which was achieved with a 400 grit resin pad process.

This job took 14 days to be finished due to a very extensive flooring preparation including patching holes, cracks, and divots, overlay installation, bolts removals, etc.,

EvoCon – WSS Shoes

WSS Shoes

Los Angeles-CA

Another project from EvoCon Construction Inc. IT’S SO CLEAN to Grinding and Prepare the concrete floor of WSS Shoes in Los Angeles.


Job Performed in 4 Days

The 22.000 square feet open frame and under construction job site had its concrete floor just poured and we had the task to flatter down the entire floor because the bad concrete installation. The Grinding work was done using a top of line Terrco and Scanmaskin grinders machines and was crucial to achieving the best result, lowering down all the bumps and straightening up the imperfections from the original floor installation. The job was running during day and night to be accomplished on time without interfering with the construction schedule. The job was successfully done within 4 days of its commencement.

EvoCon – Gold’s Gym

Gold’s Gym / HCG Gold Wellness Center

Santa Maria-CA – 30.000 square feet

IT’S SO CLEAN to perform a full Concrete Floor Restoration.
When EvoCon Construction Inc. hire us to accomplish this project the distance from our base in LA was our big challenge. Santa Maria is located 3 hours north of Los Angeles and we had to be 100% prepared with all types of equipment, supplies, and workmanship to perform the job with less stress.


Performed in 10 Days

The 30.000 square feet facility was previously occupied by Gold’s Gym and were vacant to be lease by the owner. The hired project was to Grind and Prepare the entire concrete floor to receive a new flooring according to the new leaser’s floor plan. The Preparation includes the removal of all anchor bolts (more than 200 counted), patch all holes, divots, cracks and Grinding the floor removing the mastic glue, epoxy paint, and all the contaminants. The Concrete floor was restored and the job was successfully accomplished within 10 days of its commencement.